Touchscreen Operation 4-5
Menu Screen
The menu can be accessed from either the Parameter screen or Graph screen.
Closes the Menu options and returns you to the previous screen.
Enters screen where you can organize, preview, export, and delete
saved data.
Used to save, load, export, import, rename, and delete Certifier
configuration files.
Access general, date, time, and display brightness settings or calibrate an
oxygen sensor.
Displays model, serial number, firmware version and last calibration date for
the interface module plus any connected modules.
C o n f i g u r i n g t h e A n a l y z e r
Measurements and Units
From the Parameter screen, access the measurement selection screen by pressing on any of the
currently displayed measurement symbols, readings, or units of measurement, or by pressing the
pencil icon in the right navigation bar.
To Next Page
Need help?
General
