4-6
Press the (+) ADD tile to select an additional measurement, or press the measurement symbol of a
currently selected measurement to change that measurement parameter.
Once pressed, a list of available measurements will be displayed in alphabetical order (see below left).
If more than one module is connected, then a letter (ex. A, B) will indicate which module the
measurement is coming from. Swipe up and down to scroll through the list options, tap to select.
To change the units of measurement for a parameter, press on the currently selected units to access a
drop-down list of available alternatives (see below right). Refer to the table Available Units of
Measurement to see all the available units for each measurement.
To reorder the selected measurements, press and hold a measurement tile to be able to drag it around
the display. The other tiles will adjust on the screen as the tile is being dragged, release the tile once
the desired position has been reached.
To Next Page
Loading...
