1. Plotted Measurements Displays current values for the selected measurements and their units
and plots the measurement on the graph. Press either the measurement symbol, reading, or units
to edit elements of the graph screen.
2. Y-Axis Scaling is displayed in the same units as those selected for the plotted measurement.
The color of the axis matches the color of the corresponding measurement parameter. With
2 measurements plotted, a second Y-axis will be displayed on the right side of the graph, colored
for that measurement. The Y-axes are not clickable.
3. X-Axis Scaling is displayed in seconds of time for all plotted measurements. The X-axis is
not clickable.
4. Trigger Indicator If enabled, the trigger timing being used by the Flow Analyzer to
define the breath cycles will be shown on the graph as vertical lines. The first (green) line
indicates the start of the inspiratory breath phase, and the second (red) line indicates the start of
the expiratory breath phase.
5. Real-time Measurements Up to four measurements can be selected to display their real-time
values beneath the graph. Press on the measurements or units to edit the graph screen.
6. Edit Graph Press while on the Graph screen to edit elements of the graph including plotted
measurements and units, axis scaling, display span, trigger time, and displayed measurements.
To Next Page
Loading...
