TSI Instruments Certifier Plus - Mounting Kit, for Certifier Plus Interface and Flow Module (PN 130399); Certifier Connector Kit (PN 130391); Flow Resistor Kit (PN 130395)

Introduction and Parts Identification 1-5
Mounting Kit, for Certifier Plus Interface and Flow Module (PN 130399)
Item
Description
Part Number
Quantity
26
RAM Double Socket Arm
130371
1
27
RAM Tough-Claw Small Clamp Base with Ball
130372
1
28
Adapter Plate for Interface + Flow Module, sheet metal
(Attach either a 4081 high flow or 4082 low flow module)
227099
1
Certifier Connector Kit (PN 130391)
Item
Description
Part Number
Quantity
5
Adapter, 22 mm x 6 mm (to connect the 4081 to Low
Flow Filter)
1102091
2
6
Adapter, 15 mm ID x 22 mm OD
1102093
1
7
Airway pressure fitting with screen
1611330
1
29
Adapter, 2 2mm F to 22 mm F, Straight
130373
1
30
Adapter, 15 mm M to 22 mm F, Pediatric Cuff
130374
1
Flow Resistor Kit (PN 130395)
Flow resistors are calibrated airway adapters used to simulate
nominal levels of resistance. Resistors can be used to
demonstrate or test changes in airway resistance. The Flow
Resistor Kit adapters can be cleaned and sterilized.
The kit includes three resistors:
Rp5, Rp20 and Rp50.