4-1
CHAPTER 4
Touchscreen Operation
D i s p l a y I n t e r f a c e O v e r v i e w
The two primary screens on the Dashboard of the Plus Flow Analyzer are the
Parameter Screen and the Graph Screen. The top, bottom, and right bars are always present
on both screens. Edits made to the instrument through any of these bars apply to the entire
instrument regardless of the screen in which you make changes from.
Parameter Screen
1. Menu Press to access Manage Data, Configurations, Settings, and Device
Information screens.
2. Module Cards A card is generated for each module connected to the interface and displays the
serial number, currently set gas type and conditions, and flow direction indicator for the connected
module. Press a flow module card to view information or edit the gas type or gas condition settings
for that particular module. If two flow modules are connected, an asterisk (*) will indicate which flow
module is being used for triggers and breath averaging.
3. Module Indicator If more than one module is connected, a letter (ex. A, B) is displayed in each
module card. These letters are used to signal from which connected module the measurements
being selected and displayed are coming from.
4. Battery Indicator Displays the current charge remaining between 0 to 100%. A lightning bolt
symbol will be shown inside the battery icon if the Certifier Plus battery is actively charging. An
To Next Page
Loading...
