TSI Instruments Certifier Plus - Loading Configurations; Saving Configurations

4-12 
Loading Configurations
Locate the configuration in the list under Local Configurations and press the 3-dot icon for the
file row. Select the Load option from the pop-up menu. Note that only one configuration can be
loaded and active on the  Flow Analyzer at a time, the check boxes are not used for
loading configurations.
Saving Configurations
To save the current  Plus Flow Analyzer setup as a configuration, navigate to the Local
tab of the Configurations screen and click the save (disk) icon. A pop-up screen provides the
options to overwrite the active configuration [SAVE] or to create a new configuration [NEW]. Note
that only one configuration file can be saved at a time, and that the check boxes are not used for
saving configurations.
As an alternative, from the Configuration screen you can choose to save your current setup by
overwriting an existing configuration on the  Plus Flow Analyzer. Locate the configuration to
be overwritten and press the corresponding 3-dot icon. A pop-up screen will ask for confirmation
before overwriting the selected configuration file.