Touchscreen Operation 4-21
Note that after pressing the SAVE button, the Certifier will return to the previous screen with the
display still paused. Press the play button (triangle icon) in the right navigation bar to resume updating
the display.
Pressing the CANCEL button from the Data Save screen will
return you to the previous screen and automatically resume
updating the display.
Continuous Logging
Continuous logging initiated from the Parameter screen will save data for the measurements currently
selected on screen. Initiated from the Graph screen, Continuous will save data for the plotted graph
measurements. The sampling rate at which data is collected can be set from 1 second to 10 minutes.
The collection time can be set from 15 seconds to up to 5 days (120 hours) of continuous logging.
With the Continuous option selected in the Data Save screen, a name is generated for the file using
Continuous followed by the current date and time. You can save with this name or edit the Name
field to input a custom name. You can input comments that will be attached to the logged file. Press
START to initiate logging, press CANCEL to disregard saving data and return to the previous screen.
To Next Page
Loading...
