UP ▲ key allows browsing backward through the
menu.
o When adjusting a parameter and the cursor is blinking
on “SET” or “EXIT” the UP ▲ key activates that
procedure.”
DOWN key
This key has the following functions:
In the menu directories:
o This key enables the operator to browse through the
cycles.
In the directories available:
o When the cursor is blinking on a number, the DOWN
▼ key decreases its value.
o When the cursor is blinking on menu selection, the
DOWN ▼ key allows browsing forward through the
menu.
o When adjusting a parameter and the cursor is blinking
on “SET” or “EXIT” the
DOWN ▼ key activates that procedure.
START/STOP key
This key has the following functions:
In the main screen:
o Starts the process when the required program was
chosen.
o Stops the current process.
o Cancels the ERROR message displayed on the screen
and opens the electric door lock.
In the menu directories:
o When the cursor is blinking on a number, the
START/STOP key enables moving to the next
position.
o When the cursor is blinking on a menu selection, the
START/STOP key activates that selection.
4.5 Printer
The printer is an optional device.
It prints the detailed history of each cycle performed by the
autoclave. The printing is on thermal paper with 24 characters per
line and records the sterilization cycle information for subsequent
consideration.
To Next Page
