Page 6
Only technical personnel having proper qualifications,
holding technical documentation and adequate test
instrumentation are authorized to undertake repair or
service.
1.2 Incoming Inspection
The autoclave should be unpacked and inspected for mechanical
damage upon receipt. Observe packing method and retain packing
materials until the unit has been inspected. Mechanical inspection
involves checking for signs of physical damage such as: scratched
panel surfaces, broken knobs, etc.
If damage is apparent, contact your dealer or point of purchase, so
that they may notify the manufacturer and file a claim with the
appropriate carrier.
All Tuttnauer products are carefully inspected prior to shipment
and all reasonable precautions are taken in preparing them for
shipment to assure safe arrival at their destination.
1.3 Warranty
We certify that this instrument is guaranteed to be free from
defects in material and workmanship for one year against faulty
components and assembly with the exception of glassware, lamps
and heaters.
The warranty does not include and does not replace routine
treatment and preventive maintenance to be performed
according to instructions in sec. 12.1 (Preventive
Maintenance).
Our obligation is limited to replacing the instrument or parts, after
our examination, if within one year after the date of shipment they
prove to be defective. This warranty does not apply to any
instrument that has been subjected to misuse, neglect, accident or
improper installation or application, nor shall it extend to products
that have been repaired or altered outside the factory without prior
authorization from us.
The Autoclave should not be used in a manner not described
in this manual!
To Next Page
Loading...
