Page 72
9.3 Tubing
When placing tubing on the tray, make sure that both ends
are open, without sharp bends or twists.
9.4 Loading
The loading of goods and instruments is done by means of two
stacked baskets. The baskets are provided with handles for the
convenience of the operator.
There are 2 types of baskets:
1. Baskets that are fully perforated.
2. Baskets that are not perforated except one row of holes adjacent
to the basket’s top. These baskets are intended for waste cycles,
to avoid clogging of the vessel’s drainage pipe by overflowing
liquids.
To Next Page
