Page 7
1.4 Warranty Statement
The warranty registration must be completed and returned to our
service departments; within fourteen (14) days of purchase or the
warranty will be void.
Our Technical Service Depts can be reached at:
Tuttnauer Europe b.v., Hoeksteen 11, 4815 PR, Breda,
P.O. Box 7191, 4800 GD Breda, Netherlands. +31/76-5423510,
Fax: +31/76-5423540, E-mail: info@tuttnauer.nl
Tuttnauer USA Co., Ltd., 25 Power Drive Hauppauge, NY
11788, USA
: (800) 624 5836, (631) 737 4850, Fax: (631) 737 0720
e-mail:info@tuttnauerUSA.com.
Note: If there is any difficulty with this instrument, and the solution is not
covered in this manual, contact our representative or us first. Do
not attempt to service this instrument yourself. Describe the
difficulty as clearly as possible so we may be able to diagnose the
problem and provide a prompt solution.
If the autoclave is equipped with a printer, send along a copy of the
last printout for our inspection. If replacement parts are needed,
stipulate the model and serial number of the machine.
No products will be accepted for repair without proper
authorization from us. All transportation charges must be paid both
ways by the owner. This warranty will be void if the unit is not
purchased from an authorized full service Tuttnauer dealer.
1.5 Accessories
Basket accessories: A set of two baskets is available for the unit.
The baskets are made of stainless steel wire and have a handle.
The basket allows the operator to load a large quantity of materials
into the chamber.
The pressure scale, printer option and cooling method can be set
up at any time by a technician.
Stainless steel containers: A stainless steel container, for waste
products, is available. This container has vent holes on its upper
part.
To Next Page
Loading...
