Page 27 of 110 Pages
4.1.3 Printer
The printer is an optional device.
It prints the detailed history of each cycle performed by the autoclave.
The printing is on thermal paper with 24 characters per line and records
the sterilization cycle information for subsequent consideration.
4.2 Displayed Error Messages / Symbols
The failures are divided into two categories.
a. Failure that occurs before completing the sterilization stage, which
in this case will leave the load unsterilized
b. Failure that occurs after completing the sterilization stage, which in
this case will leave the load sterilized
For the list of Displayed Error Messages / Symbols
see sec. 13. TROUBLESHOOTING
To Next Page
Loading...
