Tuttnauer 3840 - Aborted Cycles After Sterilization Stage; Canceled by User After Sterilization Stage; Pressure Time Error Post-Sterilization

Page 46 of 110 Pages
7.2 Screens following aborted cycles after complete sterilization stage
The sterilization phase ended successfully – cycle ended and the reason of
failure is displayed
For example the next two scenarios:
7.2.1 Canceled by user after complete sterilization stage
The cycle ended successfully, the reason for aborted cycle is
displayed.
7.2.2 Pressure Time Error Failure occurrence after complete
sterilization stage
The cycle ended successfully, the reason of failure is displayed.