Page 77 of 110 Pages
When entering the SET DATE AND TIME screen, the time
and date are displayed. The cursor is blinking on the "second"
digit.
The time is displayed in the upper row in the form
"HH:MM:SS". The hour range is 24 hour (i.e. from "0" to
"24")
The date is displayed in the lower row in the form "DD:
MMM: YYYY".
1. To increase or decrease the time or the date use the UP or
DOWN keys.
2. To move the cursor from one digit to another press the
START/STOP key.
3. After changing the time and the date, by pressing the
START/STOP key move the cursor to Set.
4. Confirm the new time and date by pressing UP or
DOWN keys.
The following screen will appear:
13.2 Entering the main menu
1. When the system is ready, enter the QUICK OPTIONS screen by
pressing the UP and DOWN keys simultaneously.
Note: To exit the QUICK OPTIONS screen:
move the cursor to Exit by pressing UP or DOWN keys and then
press START/STOP key.
press the UP and DOWN keys simultaneously
2. On the Quick Options screen, choose login.
To Next Page
Loading...
