Tuttnauer 3840 - Page 93

Page 91 of 110 Pages
 Move the cursor to Exit with the UP or DOWN keys
and select it by pressing the START/STOP key.
 Press the UP and DOWN keys simultaneously.
13.6.2 Reset atmospheric pressure
This subdirectory allows to reset the atmospheric pressure.
1. In order to exit the MAINTENANCE directory follows one
of the next:
 Move the cursor to Exit with the UP or DOWN keys
and select it by pressing the START/STOP key.
 Press the UP and DOWN keys simultaneously.
13.6.3 Change the Keep Heat Time
This subdirectory allows changing the Keep Heat Time. Such an
option exists only for custom cycles created by duplication. To
create a custom cycle, call for service (Admin authorization level
does not allow duplicating cycles).
Once you have a custom cycle created by duplication, you will
see Change the Keep Heat Time option available in the menu as
explained below.
1. Choose you custom cycle (in our example, 7B)
2. Login as Admin (see 6.3 Entering the main menu).
3. On the cycle main menu, choose cycle parameters.