KNOW YOUR TVS APACHE RTR 200 4V
4. Now, press the Mode button to increase the RPM
(multiples of 1000) in cyclic fashion. Once the user
starts updating, the LED stops glowing.
3. Press the Set button to enter the shift RPM
setting mode.
Setting the Shift RPM
1. Press and hold the Mode button for few seconds
till the display enters ‘SET mph MODE’ or ‘SET
kmph MODE’ (based on preferred setting).
l Previous set RPM value will be displayed in
the bar display and shift rpm indicator also
glows on entering this mode.
5. Pressing the Set button exits the setting. Once
the shift RPM is set, the LED again glows till this
mode is exit.
2. Release and press the ‘Mode’ button twice so
that the display enters ‘ ‘ mode.
Ensure the display is in ‘ODO’ mode.
TVS CONNECT
2. Press and hold the Mode button for few seconds
till the display enters ‘SET mph MODE’ or ‘SET
kmph MODE’ (based on preferred setting).
1. Ensure the display is in ‘ODO’ mode.
l Else it will enter to ‘ ‘ mode.
3. Press the Set button to set the ‘LEAN ANGLE
MODE’ or ‘RPM MODE’.
3. Release and press the ‘Mode’ button thrice so
that the display enters ‘ ‘ mode if
the RPM mode is set.
Bluetooth pairing mode ‘ ‘
Lean angle mode / RPM mode setting
Using the Bluetooth pairing mode the connected
instrument cluster of ‘TVS Apache RTR 2004V’ can be
connected to your Android™ smart phones and
â â
iPhone via Bluetooth through a TVS CONNECT app
which can be download from Google Play and the
Apple store .
â
29
To Next Page
Loading...
Need help?
General
