KNOW YOUR TVS APACHE RTR 200 4V
34
This is the default window when the connected
instrument cluster of your ‘TVS Apache RTR 200 4V’
is connected with your smart phone using Bluetooth
‘ ‘.
Customer window
Once the cluster is connected with the smart phone
the cluster displays the signal strength of the network
provider ‘ ‘ and the battery level ‘ ‘ of the smart
phone. Number of unread messages ‘ ‘ and
number of missed calls ‘ ‘.
Signal strength displayed in connected instrument
cluster might vary from the display in smart phone as
the former is referred from telephonic standards.
Incase multiple SIM cards are used in smart phone, by
default, SIM 1’s network provider’s signal strength is
shown in the display of connected instrument cluster.
Note
The connected instrument cluster will display the
incoming calls alerts from the smart phone via
Bluetooth. Ex. ‘AKASH’, will be displayed if the
contact is stored in the smart phone otherwise
number will be displayed. Ex. ‘9897712345’ (in IOS
only “Incoming call” will be displayed).
Incoming call alert display ( )
To Next Page
Loading...
Need help?
General
