To change it to the second gear, lift the lever up.
Lifting the lever up repeatedly engages all the gears in
succession up to the fifth gear.
The gear shift indicator on the speedometer dial
indicates the current gear position.
49
KNOW YOUR TVS APACHE RTR 200 4V
REAR BRAKE PEDAL
The rear brake pedal is located adjacent to the right
foot rest. To control speed of your vehicle close the
throttle completely, and gradually press the brake
pedal down wards.
Never shift gears without disengaging the clutch and
releasing the throttle. Failure to comply this will lead to
rough shift or jerk while shifting the gears. Remember
to return to neutral position before restarting the
engine.
Caution
Rear brake pedal position can be set to your
convenience. Contact your TVS Motor Company
Authorised Distributor or Dealer / Authorised Service
Center for setting the brake pedal position.
Independent use of rear or front brake reduces the
overall braking efficiency. In extreme conditions
braking with only rear or front brake may lock the
wheel which would result in skidding or toppling of
vehicle.
Braking performance is affected adversely with wet
surfaces, loose surfaces and overheating of brake
system due to unnecessary continuous application of
brakes. For safety, exercise extreme caution while
braking and also at turning. Do not accelerate while
turning.
Caution
Note
To Next Page
Loading...
Need help?
General
