KNOW YOUR TVS APACHE RTR 200 4V
Crash alert
Based the smart phone’s accelerometer data, crash
alert will be detected by smart phone and the same
will be transferred to connected instrument
cluster. Any button connected to the instrument
cluster such as Mode & Set button and ‘Info switch’
will cancel crash alert and no other alerts will be active
at this time.
Presently the crash alert is detected from the smart
phone. Hence the accuracy of the same depends of
the placement of the smart phone on the vehicle and
the status of connection of the phone to the vehicle.
For best accuracy, it is recommended that the user
mounts the phone to a rigid part of the bike.
The G-force is measured based on the vehicle speed
andnot with an on-board measurement unit. So there
might be a variation between the actual and the
measured values. The G-force value displayed is only
an estimate of the actual value.
Note
Note
Whenever the app is connected to the connected
instrument cluster the clock of instrument cluster
gets synchronised with the clock of the phone.
G-force measurement
Clock auto sync
If alert is not cancelled within 180 seconds, a message
will be sent to Emergency Contacts with location
details.
G-force measurement provides an approximate
G-force measure wherein the vehicle is operated. The
G-force is measured during both acceleration and
deceleration of the vehicle.
37
To Next Page
Loading...
Need help?
General
