It is recommended to replace the tyre when the tyre
wears off to the tyre wear indicator level (indicated by
TWI on the tyre).
Tyre rotation direction
While reassembling the tyre, after removing from
wheel rim, ensure that the arrow mark (A) provided on
the tyre, faces the direction of wheel rotation.
Tyre tread condition
Operating the vehicle with excessively worn tyres will
decrease riding stability and can lead to loss of control.
MAINTENANCE
It is not necessary to remove the tyre from wheel rim
always to attend the puncture. Eventhough, if there is
a need of tyre removal, it is strongly recommended to
use a tyre removal / fitment machine. If at all, tyre
levers need to be used, the levers should be free from
sharp edges and care should be taken not to damage
the rim and tyre.
Tyre puncture
TVS Apache RTR 200 4V is fitted with a tubeless tyre
on both front and rear wheel. lncase of any puncture /
tyre damage it is advised to visit nearest tyre
manufacturer Dealer or the tyre repair shops who
know the repairing methods of tubeless tyres.
Wheel balancing to be done every 1 year or every
12000 km. In addition, after every tyre puncture
repair or tyre replacement, wheel balancing to be
done.
Side walls of the tubeless tyres which are in contact
with the wheel rim are only seals the air inside the
wheel assembly. Hence, care should be taken not to
damage the side walls of the tyres during removal /
reassembly.
MAINTENANCE
Caution
T
W
I
A
74
To Next Page
Loading...
Need help?
General
