Document No: LT0119 F3200 Operator's Manual
Introduction
Issue 2.04 29 July 2002 Page 1-3
SCOPE (CONTINUED)
Chapter 6: Operating Instructions - System Functions
; A description of the
operation and function of keys provided on the F3200 FIP for system
testing and operation. For example, System Test, Bell Test, Bell Isolate
and Recall History.
Chapter 7: Operating Instructions - Zone Functions
; A detailed description of the
operation and function of keys provided on the F3200 FIP for zone tests
and functions.
Chapter 8: Operating Instructions - Relay/Output Functions
; A description of the
operation of keys provided on the F3200 FIP for relay and output test and
functions.
Chapter 9: Placing Into Operation
; A description of how to place a system into
operation. Also included is a System Commissioning Checklist.
Chapter 10: System Testing & Maintenance
; A description of fault finding, routine
testing and system maintenance.
Chapter 11: Network System Operation
; Operation of a networked panel or NDU.
Appendix A: Compatible Actuating Devices (Detectors)
; A list of detectors approved
for use with F3200.
1.2 ATTACHMENTS
A FIRE FIGHTER'S GUIDE is fixed inside the front cover for quick reference in
emergencies.
Your installation company should install the following documents inside the panel:
(a) An "AS INSTALLED" fire detection system diagram and/or summary, describing
the installed layout of your F3200 System.
(b) Other "AS INSTALLED" information, such as System configuration parameters.
(c) A Maintenance Log-Book.
To Next Page
Loading...
