Tyco F3200 - Zone Status Recalls

F3200 Operator's Manual Document No: LT0119
Operating Instructions - Zone Functions
Page 7-12 29 July 2002 Issue 2.04
7.5 ZONE STATUS RECALLS
7.5.1 FUNCTION
Allows an operator to recall the status for a specific zone, or, search for those zones
meeting a specified criteria, e.g. in fault or alarm.
For network systems: this section may be used to search for or display local zones; for
searching or displaying remote zones refer to Section 11.10.1.
7.5.2 OPERATING SEQUENCE - ZONE STATUS
To recall a specific zone's status.
From the base display or from a zone status display press:
where nn is the zone number (leading zeros need not be entered).
To view the status of the other zones, press:
to view the status of the next zone.
to view the status of the previous zone.
or press the "ZONE" key to select a different zone
or press "CLEAR ESC" to return to the base display.
The first line of the LCD displays the zone number and any zone name programmed for
that zone.
The second line displays the zone alarm type text for that zone, followed by its status.
The status consists of any of the following:
normal - the zone is not in alarm or fault
alarm - the zone is in alarm.