Document No: LT0119 F3200 Operator's Manual
Operating Instructions - System Functions
Issue 2.04 29 July 2002 Page 6-17
6.12 PRINT FUNCTIONS
6.12.1 FUNCTION
The PRINT key is used from the base display to access functions for printing the history,
the system status, the database or to save the database in binary format.
The output can be printed on a printer or captured on a portable computer.
Note that the printer serial port is normally used for printing events. While a print
function is in progress, events will not be printed but will be held in a queue of at least
100. Event printing automatically restarts when the printout is finished.
6.12.2 OPERATING SEQUENCE
From the base display press:
A menu with 5 options will be shown. Press a numeric key "1" to "5" to select the
appropriate option or press the "CLEAR ESC" key to return to the base display. Options
3 to 5 are not normally used by an operator and require a password. They are described
in the F3200 Programmer’s manual.
The options are:
1. Print History
This will initiate a printout of the current history from newest to oldest. These
events are the same as those shown for Recall History (Section 6.8).
2. System Status
This option can be used to print the current status of the FIP. This includes all
zones and relays together with their text names and any off-normal status, plus
any system faults.
While a print function is in progress the display will show:
"Print in progress. Press RESET to cancel".
Pressing the "RESET" key will terminate the printout immediately.
Pressing the "CLEAR ESC" key while the printout is in progress will return to the base
display and the printout will continue.
To Next Page
Loading...
