Document No: LT0119 F3200 Operator's Manual
Operating Instructions - System Functions
Issue 2.04 29 July 2002 Page 6-19
6.14 RECALL DATABASE CRC
6.14.1 FUNCTION
Allows an operator to view on the LCD the Database CRC and the time and date the
database was last changed.
This information can be used as part of an AS1851.8 testing schedule, and to provide for
detection of tampering with the system configuration.
For network systems refer to Section 11.8.4.
6.14.2 OPERATING SEQUENCE
For non-networked systems from the base display, press:
The LCD will display the database CRC, and the time and date that the database was
last altered.
NOTE: Any changes made to the database will change the numbers displayed in this
recall.
Thus, if the database is changed, the new numbers should be recorded in the log
book and the service company advised.
To Next Page
Loading...
