Document No: LT0119 F3200 Operator's Manual
Network Systems
Issue 2.04 29 July 2002 Page 11-3
INTRODUCTION (CONTINUED)
Network Zone Functions
1. Recall the status of a specific zone on a remote FIP.
2. Search for zones of a specific condition on remote FIPs.
3. Send reset, isolate, de-isolate, alarm test, fault test, abort test, and operate test
commands on a single zone or range of zones to a remote FIP.
Network System Functions
System functions which may be sent to or from network panels are:
1. System Test
2. System Fault Reset
3. Battery Test
4. Set Time/Date
5. Bells Isolate / De-Isolate / Test
6. Recall Database CRC
7. For an NDU in New Zealand mode, Trial Evacuation and Silence Alarms
8. Silence sounders on all network panels
Network Event Logging
Networked FIPs transmit all local events onto the network for use by network printers,
colour graphic systems, etc.
An F3200 FIP or NDU may be used as a system-wide history/event printer and may be
programmed to print events for selected FIPs on the network, and to log events for those
selected FIPs into the event history.
LCD Totals, LEDs and Outputs
The state of all of these may include, or be affected by, data received from other devices
on the network.
To Next Page
Loading...
