F3200 Operator's Manual Document No: LT0119
System Description
Page 2-12 29 July 2002 Issue 2.04
CONFIGURATION (CONTINUED)
Output Logic Equations
The F3200 outputs (Ancillary Relays, Auxiliary Open Collectors and Module Relays) may
be programmed to operate on a logic equation of zone and FIP status.
Network Operation
For a networked panel a variety of parameters must be programmed, including the SID
number of this panel and the SID numbers of all the other devices on the network.
** PLEASE NOTE **
If your building or occupancy requirements change, then the F3200 FIP may require
reprogramming, so please consult your installation or maintenance company.
To Next Page
Loading...
