3-1. DISASSEMBLY
Separate the spacer transmission and the rear transmission from each other and then remove the hydraulic
cylinder case.referring to paragraph 7.(1) of SECTION 4. SEPARATION OF MAJOR COMPONENTS
in Chapter 2.
(1) Ring gear,Drive pinion,and related parts.
1.Mid PTO case 2 Pinion,drive 10 3. Pinion,wheel 10LH 4. Case Brake LH 5.Arm,brake
6.Case brake 7.Pinion,wheel 10RH 8.Metal brake RH 9.Metal brake LH 10.Plate,separate
11. Plate,brake 12.Bolt,Diff 13.R.B.B(6011) 14.Case RH Diff 15.Gear,bevel 20T
16.Collar 17.Pinion Diff12 18.Shaft,pinion,Diff 19.Collar 20.Gear bevel 51
21. Plate,lock 22. R.B.B(6011)
5-16
Fig.5-24
To Next Page
Loading...
