-
16
-
3. Threading the needle thread
Please turn off the power switch and confirm that the motor has stopped before operation to
prevent personal injuries caused by unexpected start.
Thread as per the order as shown above.
The threading can be done easily by using the needle threader supplied with the machine.
For different thread, different methods shall be used for the thread guide.
4. Threading the bobbin case
Rotating direction of bobbin and threading
1) Insert the bobbin in the direction of arrow.
2) Pass the thread through thread slit①, then pass through the tension spring② from the bottom, and repass
through the thread slit③ to pull the thread out from④.
3) Please note that when conducting purl stitching and whip stitching sewing, threading methods for④ will be
different.
(Cotton thread,
spun thread)
(Synthetic
filament thread)
To Next Page
Loading...
