typical GT1790A - Machine Installation Guide; Table Assembly Procedures

-
5
-
III. Installation
(1) Table Assembly
1) Fix control box⑽ and power switch⑿ on the table.
2) Fix the power switch⑿ with fixing strip.
3) Pass four bed base fixed screws (4) through bed base.
4) Install rubber cushions ⒃ to holes⒄ (4) for fixing bed base and the fixe the bed base⒂.
5) Fix machine head support bar⑾ on the table⑾.
6) Connect the pedal and pedal sensor⒀ with accessory connecting rod⒆ after placing the sewing machine
main body on the bed base⒂.