typical GT1790A - Page 64

-
61
-
No
Item
Setting range
Edit unit
Initial value
K018
Pattern selection function under sewing mode disabled/enabled
-
-
Disabled
K019
Thread trimming during continuous stitching permitted/prohibited
-
-
Permitted
K021
Release amount of bobbin thread trimmer at the start
of sewing
This item sets the amount of releasing the bobbin thread
trimmer at the start of sewing.
0~15
1 pulse
8
K022
Presser lifter speed
This item sets presser lifter speed.
1~3
-
3
K023
Presser abnormity detection position
Set the height for detecting height abnormity of E083
presser.
When it is set to "0", abnormity detection will not be
performed.
0~10.0
0.1
s.0
Disabled
Enabled
Permitted
Prohibited