Version 1
12
Optional Accessories
CFM-10:
A scanning module used for close proximity leak detection in pressure and vacuum systems.
UWC-10
The UWC-9/10, Ultrasonic Waveform Concentrator, doubles the detection distance. The UWC-9/10 is
great for corona, tracking and arc detection at safe distances. Includes carrying case
DHC-10
Headphone headset is for Standard Applications that do not require the use of a hard hat
DHC 1991 ear piece
Ear piece eliminates the need for standard head-phones.
SA-2000 Speaker amplifier
The SA-2000 is a loud speaker and amplifier that is compatible with the Ultraprobe headphone output
jack.
UFMTG-1991
The UFMTG 1991 is a multi directional warble tone generator. It has a high power output with a
circular transmission pattern of 360°.
WTG-2SP Warble pipe threaded tone generator
A Warble Tone Generator that is used in test conditions where it is not possible to physically place the
standard WTG-1 Warble Tone Generator, such as in pipes or in certain heat exchangers or tanks. Fea-
tures: 1” NPT male threaded nipple with adapters for ¾” and ½” female nipple with a 10 turn amplitude
adjustment dial. Metric adapters available.
BCP
Battery Recharge Pod docking station for charging Ultraprobe Batteries (Lithium Ion only). This optional
pod will charge a battery that has been removed from the Ultraprobe 10,000 and is also used to charge
extra batteries.
BCH-WTG2
This is an optional battery charger for use with all Warble Tone Generators. The line input is 220 VAC@
50Hz and the charging time is about 8 hours.
HTS-10
Holster set for the UP10000. Includes a utility belt and two holsters, one for the UP10000 and one extra
module and rubber focusing probe; the other for accessories.
LLA
Liquid Leak Amplifier case. It holds 12 8 oz. Bottles of Liquid Leak Amplifier (For Ultrasonic Bubble Test-
ing).
To Next Page
Loading...
Need help?
General
