Version 1
57
Instructions for setting combination on carrying case
The combination is factory set at ,0-0-0,, Setting your personal combination:
1. Open the case. Looking at the back of the lock inside the case you will see a change lever. Move this
change lever to the middle of the lock so that it hooks behind the change notch (picture 1 ).
2. Now set your personal combination by turning the dials to the desired combination (i.e. birthday, phone
no. etc.)
3. Move the change lever back to the normal position (picture 2).
4. To lock, rotate one or more dials. To open the lock, set your personal combination. International patents
pending.
1.
2.
To Next Page
Loading...
Need help?
General
