EasyManuals Logo

UE Systems ULTRAPROBE 10000 User Manual

Default Icon
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Version 1 2
Safety advisory
Please read before using your instrument.
Warning
Improper use of your ultrasonic detector may result in death or serious injury. Observe all safety precautions.
Do not attempt to make any repairs or adjustments while the equipment is operating. Be sure to turn off and
LOCK OUT all electrical and mechanical sources before performing any corrective maintenance. Always refer
to local guidelines for appropriate lockout and maintenance procedures.
SAFETY PRECAUTION:
Although your ultrasonic instrument is intended to be used while equipment is operating, the close proximity
of hot piping, electrical equipment and rotating parts are all potentially hazardous to the user. Be sure to use
extreme caution when using your instrument around energized equipment. Avoid direct contact with hot pipes
or parts, any moving parts or electrical connections. Do not attempt to check findings by touching the equip-
ment with your hands or fingers. Be sure to use appropriate lockout procedures when attempting repairs.
Be careful with loose hanging parts such as the wrist strap or headphone cord when inspecting near moving
mechanical devices since they may get caught. Don't touch moving parts with the contact probe. This may not
only damage the part, but cause personal injury as well.
When inspecting electrical equipment, use caution. High voltage equipment can cause death or severe injury.
Do not touch live electrical equipment with your instrument. Use the rubber focusing probe with the scanning
module. Consult with your safety director before entering the area and follow all safety procedures. In high
voltage areas, keep the instrument close to your body by keeping your elbows bent. Use recommended pro-
tective clothing. Do not get close to equipment. Your detector will locate problems at a distance.
When working around high temperature piping, use caution. Use protective clothing and do not attempt to
touch any piping or equipment while it is hot. Consult with your safety director before entering the area.

Table of Contents

Other manuals for UE Systems ULTRAPROBE 10000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UE Systems ULTRAPROBE 10000 and is the answer not in the manual?

UE Systems ULTRAPROBE 10000 Specifications

General IconGeneral
BrandUE Systems
ModelULTRAPROBE 10000
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals