Version 1
41
10. Spin to Temperature Out
11. Click on the Temperature setting (it will blink rapidly) Spin to the left to select a “100” reading (ex
200, 300) and to the Right to select a “tens” reading (ex: 50)
12. Click to set
13. Spin to Man( Manufacturer)
14. .Click to enter and Spin to the desired Manufacturer. The choices are: SAR/ARM/BES/NIC
15. Spin to Model
16. Click to Enter and spin to a Model code. The choices are codedMDL0 toMDL9
17. Click to set
18. Spin to Application and click to enter
19. Spin to select an Application. The choices are: SM/AH/RAD/HE/TR
20. Click to set
21. Spin to Type
22. Click to enter and spin to select. The choices are: IB/TD/TH/FT
23. Spin to MORE
24. Spin to PIPE DIAMETER
25. Click to enter
26. Spin to the desired diameter
27. Click to set
28. Spin to ORIFICE SIZE
29. Click to enter and spin to desired ORIFICE SIZE
30. Click to set
31. To return to previous screen, spin to PREVIOUS and Click or
32. Press Enter to store the information and Spin and Click to exit.
Storage Display function, the identical data and data entry as described above will be shown. Additional
information such as Date, Time, Module used and a command for data storage will be shown in the
MORE function.
Field entry list for steam
Test Results: OK/LEK/BLW/NIS/PLG/SIZ/OTH Man: SAR/ARM/BES/NIC/ Model: MDLO to MDL9 App:
SM/AH/RAD/HE/TR/ Type: IB/TD/TH/FT/ PIPE DIA: 1/16, 1/8, ¼, 3/8, 1/2, ¾, 1.00, 1.25, 1.50, 2.00,
2.50, 3.00, 3.50, 4 up to 36 in.
ORIFICE SIZE 1/32, 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, ¼, 9/32, 10/32, 11/32, 3/8, 13/32
To Next Page
Loading...
Need help?
General
