In all events:
- The "continuous" key can stop a cycle that is running at any time, and should remain lighted during
cycles, and also can be used at the end of the cycle to allow the dose to be extended.
- The 150 second safety limit is also maintained.
- Any programmed “continuous” functions apply to the whole of the machine (all the groups).
- The "continuous/stop" dose should be included in the timers
- In the event of a "credit-debit" or "debit-credit" computer connection the continuous/stop key only
serves to stop the cycle, as currently.
Counter
- To count the drinks prepared from 1, 2, 3 or 4 BGX control boxes in the configuration: DM, 2cups,
3cups, or on/off (including continuous/stop).
- To meter the "hot water" and "
Steam
Air
steam".
- Enables reading of the various meters independently with defined access and reset authorisations.
List of counters available:
6 groups of counters are provided each containing the following counters:
A. TOTAL Small + large "coffees" + continuous/stop
(The sum of all the groups) + TOTAL per group
B. TOTAL Small "coffee" (the sum of all the groups)
+ TOTAL Small "coffee" per group
C. TOTAL Large "coffee" (the sum of all the groups)
+ TOTAL large "coffee" per group
D. Continuous/stop or 3
rd
dose
E.
Steam
Air
steam
F. Hot water
Definition of accesses for reading and resetting:
* Level 0→ Reading of USER counters (if authorised by level 2 or USB level)
* Level1 and 2→ Reading of all USER counters and resetting only of small and large coffee counting (total
and partial)
* Level 3→ Reading and resetting of all USER counters.
* USB level→ Reading and resetting of USER counters, reading of "machine maintenance" counters.
It is not possible to reset the "machine maintenance" counters (except in special cases).
Counter settings (access via level 3 and USB level)
(Level 0 and level 1 and 2, the icon is not visible)
To Next Page
Loading...
Need help?
General
