8. USE
Dosamat control box (part number 45100)
• The figures
1 2 3 correspond to the filter holder engaged (1, 2 cups or 3 cups)
• The
keys correspond respectively to the selection: (small dose) c, or (large
dose)
C.
• The
key selects the manual mode: Manual cycle start.
• The
key selects the Self mode: Automatic start of the cycle corresponding to the filter
holder engaged.
• The continuous/stop key enables us to stop a cycle in progress or start a continuous cycle
(not dosed), except if the stop/continuous function is activated.
A brief pressure at the end of the cycle also triggers the display of the infusion time of the cycle if
the time function has been activated, except during the pre-infusion time.
Note: it is possible to change from a small to a large cup during a cycle, and vice versa, in this case, if
the change from large to small dose is performed when the dose has already been exceeded, the cycle
stops.
2-cup control box (4-dose part number: 45102)
• The keys correspond respectively to 1c (1 small dose) 1and 2c
(2 small doses)
• The keys correspond respectively to 1C (1 large dose) and 2C
(2 large doses)
To Next Page
Loading...
Need help?
General
