• The continuous/stop key can be used:
• to stop a cycle in progress
• to start a continuous cycle (not dosed)
• A brief pressure at the end of the cycle also triggers the display of the infusion time if the
time function has been activated, except during the pre-infusion time.
Note: it is possible to change from a small to a large cup during a cycle, and vice versa, in this case, if the
change from large to small dose is performed when the dose has already been exceeded, the cycle stops.
3-cup control box (6-dose part number: 45103)
• The
keys correspond respectively to the figures 1 2 3
(1 dose, 2 doses, 3 doses)
• The key serves for the selection of a small dose c, or large dose C.
• The continuous/stop key can be used:
• to stop a cycle in progress
• to start a continuous cycle (not dosed)
• A brief pressure at the end of the cycle also triggers the display of the infusion time if the
time function has been activated, except during the pre-infusion time.
Note: it is possible to change from a small to a large cup during a cycle, and vice versa, in this case, if
the change from large to small dose is performed when the dose has already been exceeded, the cycle
stops.
To Next Page
Loading...
Need help?
General
