Manual control box (ON/OFF part number: 45101)
• The display
shows the infusion time
Cycle start
Cycle stop
Steam
Air
control box (part number 45104)
• The display shows the volume of the water dose, the steam timer or displays the actual temperature
of the
Steam
Air
sensor, depending on the cycle in progress.
• In the event of simultaneous cycles, the
Steam
Air
temperature display has priority.
• The
keys correspond respectively to the programmed small and large water doses.
• The
key corresponds to the timed steam.
• The
key corresponds to the Steam
Air
mode (the cycle stops automatically when the
sensor reaches the programmed temperature).
• The continuous/stop key can be used to stop a cycle in progress.