Description of the cycle end:
Step 5
The BTA indicates:
The BGX control boxes are blue for 2 seconds and then return to display and normal operation.
The BTA displays the message above for 5 seconds and then returns to normal display
Important:
- Once the groups have been selected and confirmed (step 2) it is no longer possible to exit from the
cleaning mode, the home key disappears.
- The dosamat is disabled.
- If there is a power cut during the cycle, the cycle should restart automatically after the machine has
restarted, at the point where it was previously.
- Once the cleaning cycle is started (step 2) it is no longer possible to stop it, the group keys are
disabled.
- The display of step 3 is triggered by the end of the last cycle.
- The display of step 4 is triggered by the end of the last cycle.
During the rinsing cycle:
Phase Display Key
Rinsing ready
“nr” “Rinsing ready”
Enabled, steady blue on the control
boxes of the group
on the strip
Rinsing in progress
Time remaining (seconds) Disabled, flashing blue
Rinsing complete
“nr” “Rinsing complete” Disabled, steady blue
To Next Page
Loading...
Need help?
General
