9
HOW TO USE THIS MANUAL
Included in this manual are the essentials of safe forklift operation, truck
features and functions and explanation of how to maintain your lift truck.
This manual is organized as follows:
SAFETY RULES AND PRACTICES
Safety rules and major operating hazards you could encounter while
operating a lift truck.
OPERATING CONTROLS AND FUNCTIONS
Description of each major component of the 1H2 series forklifts and
how the instruments, gauges, and controls operate.
OPERATING THE TRUCK
Details of safe and efcient operating procedures.
GENERAL CARE AND MAINTENANCE
Care and planned maintenance of the battery, forklift, forks and side
shift.
SPECIFICATIONS
Truck and mast specications.
The operating instructions in this guide do not replace any other rules
or laws of safety that are used in or required by federal, state, local
agencies or your own operational area. The operating practices listed
do not follow any order of importance but are all to be learned and used
in your daily operation. Make sure that your truck is correctly equipped
for use in your work area according to these rules or laws.
There may be certain hazards that may not or cannot be avoided
solely by mechanical means in the everyday use of material handling
trucks. Only the intelligence, good judgement and care of the operator,
along with proper planned maintenance, will help assure that the unit
operates correctly. It is important to have only trained, reliable personnel
operating material handling trucks. Operate your lift truck safely; careful
driving is your responsibility. Drive defensively and think about the safety
of people who are working nearby. Know your truck’s capabilities and
limitations.
UCA recommends that this Operator’s Manual be kept with the
unit at all times or in a location easily accessed by the operator. If a
replacement manual is needed, please contact your Local Authorized
Dealer and a replacement will be sent for a nominal fee.
To Next Page
Loading...
