65
BATTERY CHARGERS
The off-truck type charger is a separate entity. The battery charger may
or may not be included with the truck.
WARNING
!
!
Determine the type of battery charger that is used for the forklift
you are using. Operate the forklift accordingly.
• Alternating current power source voltage will vary with the
area in which the forklift is used. Determine the local voltage
before attempting to charge the battery. Use the appropriate
transformer tap on the battery charger.
• Tap adjustment requires specialized knowledge and
expertise.
• Tap conguration must be set before battery charging. For
full charging, select a time frame in which minimum voltage
uctuation occurs, then select the appropriate transformer
tap. If the wrong tap is selected, over-charging or under-
charging will result. If you have any questions, contact your
Local Authorized Dealer.
• A current or over-current circuit
breaker (hereafter referred to
simply as breaker) must always
be connected to the AC power
supply side of the battery
charger.
• Always use charging equipment
that is appropriate for the forklift battery being charged.
GENERAL CARE AND MAINTENANCE
WARNING
!
!
• If multiple battery chargers are in use, each battery charger
must be equipped with its own circuit breaker.
• Alternating current requires high-capacity units. Set the
charging equipment power source to the appropriate level.
• Specialized knowledge and expertise is required. For
information on the legal requirements of your country,
contact your Local Authorized Dealer.
To Next Page
Loading...
