58
OPERATING THE TRUCK
TURNING (cont’d)
Hold the steering wheel knob with your left hand, and turn the steering
wheel conrming the direction of the driving wheel shown on the wheel
indicator.
CLIMBING
The 1H2 (SRX) Reach Truck has been designed to operate on smooth
level oors. It may be required to travel on grades.
For safety reasons, when driving a loaded forklift up a grade, slope or
incline, it must be driven forward with the load in front; on a downgrade,
backward, with the load behind.
STOPPING AND PARKING
To stop the forklift either move the multifunction handle to neutral
position or plug until the truck comes to a stop.
1. Use the multifunction handle to slow the unit until it comes to a
stop. The electric brake will automatically apply when the truck
stops & multifunction handle is in neutral position.
2. Lower forks.
3. Be sure to turn the ignition switch off.
4. Depress emergency switch.
5. Disconnect battery.
To Next Page
Loading...
