UniCarriers SRX Series - Clock and Hour Meter Display

38
OPERATING CONTROLS AND FUNCTIONS
METERS, INDICATORS AND LAMPS (cont’d)
STATUS DISPLAY (cont’d)
Hour meter conrmation screen
When pressing the
or button of the mode selection buttons
with the display showing the basic screen, the hour meter conrmation
screen will appear. The display will return to the basic screen after 5
seconds have passed.
TOTAL
The meter shows the length
of time the ignition switch is in
the ON position.
TRAVEL
The meter shows the total
traveling time.
HYD.
The meter shows the total
hydraulic operation time.
PEDAL
The meter shows the total length of time the presence pedal is
depressed.
NOTE:
If the forklift truck travels or hydraulic operation is performed within
5 seconds after the hour meter conrmation screen is displayed, the
display returns to the basic screen immediately.
CLOCK AND HOUR METER DISPLAY
Clock setting screen
To set the clock press the
button of the mode selection buttons
for more than 3 seconds with the display showing the basic screen, the
clock setting screen will appear. After setting the clock, press the
button once to return to the basic screen.
Hour meter check screen
Any of the following three types of hour meter displays can be selected:
F
E
AM 10:00
F
E
12345.6 HR
Clock display
Hour meter display