37
OPERATING CONTROLS AND FUNCTIONS
METERS, INDICATORS AND LAMPS (cont’d)
STATUS DISPLAY (cont’d)
While traveling
If the presence pedal is released for more than 0.5 second while
traveling, a warning is displayed and the forklift truck stops traveling.
When the multi-functional lever is returned to the neutral position, and
you depress the presence pedal the warning disappears and the forklift
truck can travel.
Neutral safety (for hydraulic equipment)
If the ignition switch is turned to the ON position with the multi-
functional lever operated to lift down/up or any other hydraulic switch
is operated, a warning is displayed and the hydraulic function will not
operate. When the multi-functional lever is returned to the neutral
position or the operation of the hydraulic switch is returned to neutral,
the warning disappears and the forklift truck hydraulic function can then
be operated.
F
E
AM 10:00
When starting to handle a load
If the presence pedal is depressed with the multi-functional lever
operated to lift down/up, or hydraulic function is operated when
starting to handle a load, a warning is displayed and the forklift truck
cannot handle the load. When the multi-functional lever is returned to
the neutral position or the operation of the hydraulic function switch
is stopped, the warning disappears and the forklift truck can start to
handle loads again.
While handling a load
If the presence pedal is released for more than 0.5 second while
handling a load, a warning is displayed and the forklift truck stops the
hydraulic functions. When the multi-functional lever is returned to the
neutral position or the operation of the hydraulic functions are stopped,
the warning disappears and the forklift truck can handle the load.
F
E
AM 10:00
F
E
AM 10:00
F
E
AM 10:00
To Next Page
Loading...
