71
GENERAL CARE AND MAINTENANCE
BATTERY REPLACEMENT (cont’d)
8. Connect the battery plug.
9. Install the battery retainers (covers on “EE”)
WARNING
!
!
• Secure the battery by adjusting the battery securing bolt so
that the battery cannot move.
• Horizontal motion of the battery must not exceed. (1/2 inch)
(13 mm) side to side or front to back.
BATTERY CONNECTOR
WARNING
!
!
• Make sure the battery is secure & battery gates/retainers are
in place. Improper connection could damage some electronic
components.
The battery connector is used to supply battery power to the required
electrical units or parts. Always connect the connector before forklift
operation and check that the gate is secure.
To Next Page
Loading...
