50
OPERATING CONTROLS AND FUNCTIONS
STEERING DIRECTION
Control
Forward direction
(standard)
Reverse direction
(optional)
Steering direction Travel forward Travel backward
Clockwise
Counterclockwise
Clockwise
Counterclockwise
Forks Leading Forks Trailing
SWITCHES
IGNITION SWITCH
Insert the key into the ignition switch to start
or stop the motor. Each new forklift comes
with two keys, use one for operation and
store the other in a safe place as a spare.
OFF Position
This position allows the key to be inserted or
removed.
ON Position
When the ignition switch is in the ON position, backlighting for the LCD
will be on. The hour meter, clock and battery capacity meter will all be
active. The forklift is now ready for operation.
START Position
The electric motor is powered and started at this position. Turn the
key to the right from the {ON} position. The display illuminates and the
forklift truck is powered on. When the key is released, the key switch
will automatically return to the {ON} position.
WARNING
!
!
• Before leaving the operator compartment, be sure the multi-
function handle is in the neutral position, fully lower the load
carrying device and turn the ignition switch OFF. If the unit is
unattended, remove the key.
CAUTION
!
• Even if the key is in the OFF position, electric accessories such
as control units are powered when the battery is connected to
the truck.
To Next Page
Loading...
