ТМ
• the Cleaning by cleanser inscriptionappears–thevendingmachineushesthesystemwiththe
remainderofthewashingagent.Thesystemwillbeushedbyanother225mlofwashingagent.
•upon completion of the previous operation, the Prepare water inscription appears – put the milk
supply tube into the container with water and press YES.
•the Cleaning by water inscription appears – the vending machine washes the residues of the
washingagentfromthesystemaway.Thevendingmachinewillush250mlofwater,washingthe
residues of the washing agent away.
•upon completion of the previous operation, the Prepare milk inscription appears – put the milk sup-
ply tube into the container with milk and press YES. Make sure that there’s no washing solution
on the tube external surface. Remove the residues by clean damp cloth and wipe dry as ap-
propriate.
•the Filling with milkinscriptionappears–thevendingmachinellsthesystemwith15mlofmilk.
•after the successful completion of washing the ОК inscription appears.
If the cancel button is pressed, the washing cycle is nished. If not washing the system in
time, the vending machine will generate an error. The following inscription will be shown: HOT NO
FRESH MILK.
Drinks with fresh milk will become inaccessible!
15.Thevendingmachinemilksystemiswashedandlledwithfreshmilk.
16. Switch the vending machine off by turning the switch at the rear wall to the “0” position.
17. Take out the service key.
18. Clean the cappuccinatore by following the instructions as appropriate (Cappuccinatore cleaning – see
below).
19. Close the vending machine door.
20. Switch the vending machine on by turning the switch at the rear wall to the “I” position.
21. The vending machine is ready for operation.
Note: The Fast Clean Fresh milk button is recommended for use in vending machines with a check
valveforllingthesystemwithmilkafterconductingthe“fullwashing”,sothattherstportionafterthe
washing had no milk with water. Washing operations (see above) has no items for a washing agent.
To Next Page
Loading...
