Unify OpenScape CP400 - Page 136

136 Private / Security
z You can also configure this setting via the Web interface page 152.
@ If nec. Press the Main Menu key.
Open using the softkey
Open using the softkey.
if nec. j Enter and confirm the User password.
€ Select "Changing the user password."
Open using the softkey
Open using the softkey
The input field is displayed.
j Enter the current password and conclude your input with the softkey.
Open using the softkey
The input field is displayed.
j Enter the new password (at least 6 characters) and conclude your input with the
softkey.
Open using the softkey
The input field is displayed.
j Re-enter the new password and conclude your input with the softkey.
Save your input. The new password is now valid.
Deactivating the password prompt
You can deactivate the phone's password prompt if a password has already
been configured.
The preset password "000000" corresponds to a blank password. In other
words, the phone cannot be locked and the user menu is not password
protected (see also  page 136).
Service/Settings
_
$
User:
-
_
Changing the user password
-
_
Current password
K
_
©
******
Q
_
New user password
K
_
©
******
Q
_
Confirm password
K
_
©
******
Q
_
Q
_
Deactivating the password prompt does not apply to the Web interface
 page 152. As long as the password prompt is deactivated, you will not
have access to the web interface via the User settings.
If you deactivate the password prompt, you can no longer lock the phone
 page 138 and the user menu is not password protected.