14.27 Command: Seek
Stacking
When stacking, the robot arm moves to the starting position, and then moves opposite the direc-
tion to search for the next stack position. When found, the robot remembers the position and
performs the special sequence. The next time round, the robot starts the search from the remem-
bered position incremented by the item thickness along the direction. The stacking is finished
when the stack height is more than some defined number, or when a sensor gives a signal.
e-Series II-98 Version 3.11
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
To Next Page
Loading...
