15 Setup Screen
• Initialize Robot Goes to the initialization screen, see 11.5.
• Language and Units Configure the language and units of measurements for the user inter-
face, see 15.1.
• Update Robot Upgrades the robot software to a newer version, see 15.2.
• Set Password Provides the facility to lock the programming part of the robot to people
without a password, see 15.3.
• Calibrate Screen Calibrates the “touch” of the touch screen, see 15.4.
• Setup Network Opens the interface for setting up the Ethernet network for the robot con-
trol box, see 15.5.
• Set Time Set the time and date for the system and configure the display formats for the
clock, see 15.6.
• URCaps Setup Overview of installed URCaps as well as options for installation and unin-
stallation, see 15.7.
• Back Returns to the Welcome Screen.
Version 3.11
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
II-105 e-Series
To Next Page
Loading...
